Hi,
This PC went from Windows 7 to 8 to 8.1 to 10.
I had RAID configured in the rom controller from the very beginning. It only has one drive right now, but it showed in bios display as "Non-Raid Device".
I added two raid disks that had failed on another system. I needed to add the windows software to diagnose the new drives. I installed RST without installing the optional driver upgrade.
Now windows starts to boot and goes to the repair utilities and cannot find windows 10.
Do I need to add the new RAID driver to the boot drive? If so HOW?
FYI: the 2 extra disks have been removed and repaired elsewhere.
Thanks,
Sean