Quantcast
Channel: Intel Communities : All Content - General Questions
Viewing all articles
Browse latest Browse all 6470

Unable to extend Raid1 volume to full disk capacity

$
0
0

Need help restoring RAID volume

I have been working for a number of years with a Raid 1 volume, using two identical 1 TB hard drives. Recently one of the hard drives failed and as the capacity of 1 TB had almost been used I purchased two identical 4 TB drives. I rebuilt the Raid volume successfully from the one remaining good drive. At first the raid volume showed only a capacity of 953 GB, I was able to extend that to 1.7 TB. I have been unable to extend the raid volume to the full 3815 GB which the two drives have. In addition I am getting error 0xC8000247 which apparently is due to an outdated Raid driver. I have tried many times to download an updated driver from the Intel download site, but I am getting continuously an error message that this site is unavailable. I have included below a system report.

I would very much appreciate help with restoring the full capacity of the raid volume and with the eradication of the error message 0xC8000247 which is associated with a “not genuine Windows 7” message. I am running genuine Windows 7 and have a key for that, but cannot run the Windows update.

 

Many thanks in advance!

Here is the system report:

System Report

 

System Information

OS name:  Microsoft Windows 7 Ultimate

OS version:  6.1.7601 Service Pack 1 7601

System name:  DELL-XPS

System manufacturer: Dell Inc.

System model:  Studio XPS 8100

Processor: GenuineIntel Intel64 Family 6 Model 30 Stepping 5 2.801  GHz

BIOS:  Default System BIOS, DELL   - 20100708

 

Intel® Rapid Storage Technology

Kit installed: 9.5.0.1037

User interface version: 9.5.0.1037

Language:  English (United Kingdom)

Intel RAID controller: Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller

Number of SATA ports: 5

RAID option ROM version: 9.5.0.1037

Driver version: 9.5.0.1037

ISDI version: 9.5.0.1037

 

Device Information

Name:  Array_0000

Size:  3,436 GB

Available space:  0 GB

Disk data cache: Enabled

Number of volumes:  1

Volume member: Volume0

Number of disks:  2

Array disk: WD-WMC5D0D56CW5

Array disk: WD-WMC1F0E8CXC2

 

Name:  Volume0

Status:  Normal

Type:  RAID 1

Size:  1,718 GB

Data strip size:  64 KB

Write-back cache: Disabled

System volume: Yes 

Initialized:  Yes 

Verification errors found: 19

Blocks with media errors: 0

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

Parent array: Array_0000

Number of disks:  2

Array disk: WD-WMC5D0D56CW5

Array disk: WD-WMC1F0E8CXC2

 

Disk on port 0

Port location: Internal

Status:  Normal

Usage:  Array disk

Size:  3,815 GB

Serial number: WD-WMC5D0D56CW5

Model:  WDC WD4003FZEX-00Z4SA0

Firmware:  01.01A01

System disk:  No

Password protected: No

Disk data cache: Enabled

Native command queuing: Yes 

SATA transfer mode: Generation 2

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

 

Disk on port 1

Port location: Internal

Status:  Normal

Usage:  Array disk

Size:  3,815 GB

Serial number: WD-WMC1F0E8CXC2

Model:  WDC WD4003FZEX-00Z4SA0

Firmware:  01.01A01

System disk:  No

Password protected: No

Disk data cache: Enabled

Native command queuing: Yes 

SATA transfer mode: Generation 2

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

 

Disk on port 2

Port location: Internal

Status:  Normal

Usage:  Unknown

Size:  0 GB

Serial number: K979C4J5139

Model:  HL-DT-ST BD-RE  BH30N

Firmware:  A102

System disk:  No

Password protected: No

Disk data cache: Disabled

Native command queuing: No

SATA transfer mode: Generation 1

Physical sector size: 0 Bytes

Logical sector size: 0 Bytes

 

Disk on port 3

Port location: Internal

Status:  Normal

Usage:  Unknown

Size:  0 GB

Serial number: R4606GASC9202500

Model:  TSSTcorp DVD+/-RW TS-H653G

Firmware:  DW10

System disk:  No

Password protected: No

Disk data cache: Disabled

Native command queuing: No

SATA transfer mode: Generation 1

Physical sector size: 0 Bytes

Logical sector size: 0 Bytes

 

Empty port

Port:  5

Port location:  External

 

-------------------------------------------------

System Report

 

System Information

OS name:  Microsoft Windows 7 Ultimate

OS version:  6.1.7601 Service Pack 1 7601

System name:  DELL-XPS

System manufacturer:  Dell Inc.

System model:  Studio XPS 8100

Processor: GenuineIntel Intel64 Family 6 Model 30 Stepping 5 2.801  GHz

BIOS:  Default System BIOS, DELL   - 20100708

 

Intel® Rapid Storage Technology

Kit installed: 9.5.0.1037

User interface version: 9.5.0.1037

Language:  English (United States)

Intel RAID controller: Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller

Number of SATA ports: 5

RAID option ROM version: 9.5.0.1037

Driver version: 9.5.0.1037

ISDI version: 9.5.0.1037

 

Device Information

Name:  Array_0000

Size:  3,436 GB

Available space:  0 GB

Disk data cache: Enabled

Number of volumes:  1

Volume member: Volume0

Number of disks:  2

Array disk: WD-WMC5D0D56CW5

Array disk: WD-WMC1F0E8CXC2

 

Name:  Volume0

Status:  Normal

Type:  RAID 1

Size:  1,718 GB

Data strip size:  64 KB

Write-back cache: Disabled

System volume: Yes 

Initialized:  Yes 

Verification errors found: 19

Blocks with media errors: 0

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

Parent array: Array_0000

Number of disks:  2

Array disk: WD-WMC5D0D56CW5

Array disk: WD-WMC1F0E8CXC2

 

Disk on port 0

Port location: Internal

Status:  Normal

Usage:  Array disk

Size:  3,815 GB

Serial number: WD-WM

Model:  WDC WD4003FZEX-00Z4SA0

Firmware:  01.01A01

System disk:  No

Password protected: No

Disk data cache: Enabled

Native command queuing: Yes 

SATA transfer mode: Generation 2

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

 

Disk on port 1

Port location: Internal

Status:  Normal

Usage:  Array disk

Size:  3,815 GB

Serial number: WD-WM

Model:  WDC WD4003FZEX-00Z4SA0

Firmware:  01.01A01

System disk:  No

Password protected: No

Disk data cache: Enabled

Native command queuing: Yes 

SATA transfer mode: Generation 2

Physical sector size: 3072 Bytes

Logical sector size: 512 Bytes

 

Disk on port 2

Port location: Internal

Status:  Normal

Usage:  Unknown

Size:  0 GB

Serial number: K979C4J5139

Model:  HL-DT-ST BD-RE  BH30N

Firmware:  A102

System disk:  No

Password protected: No

Disk data cache: Disabled

Native command queuing: No

SATA transfer mode: Generation 1

Physical sector size: 0 Bytes

Logical sector size: 0 Bytes

 

Disk on port 3

Port location: Internal

Status:  Normal

Usage:  Unknown

Size:  0 GB

Serial number: R4606GASC9202500

Model:  TSSTcorp DVD+/-RW TS-H653G

Firmware:  DW10

System disk:  No

Password protected: No

Disk data cache: Disabled

Native command queuing: No

SATA transfer mode: Generation 1

Physical sector size: 0 Bytes

Logical sector size: 0 Bytes

 

Empty port

Port:  5

Port location: External


Viewing all articles
Browse latest Browse all 6470

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>