I recently upgraded from WIN 7 to WIN 10.
I anticipated that there would be some issues but this one caught me unprepared.
The Intel® Rapid Storage Technology (RAID 1) worked well under WIN 7. Now under WIN 10 it appears to be set up and working at the hardware level however, the software interface that was formally available seems to have gone away. In fact I did not delete it, it just went away. The result is that unless you restart the computer, you can not see if the RAID 1 is working properly. Until then, you can not see if it is healthy, rebuilding or what the status is.
There does not appear to be any WIN 10 Intel® Matrix Storage Manager software listed at:
https://downloadcenter.intel.com/product/55005/Intel-Rapid-Storage-Technology-Intel-RST
My hardware:
Intel® Desktop MotherBoard DH67BG
Intel Core i7-3770K processor
12 GB RAM
Win 10 Pro build 10586.589
Three hard drives:
Drive 0 and Drive 1 are:
Seagate NAS HDD ST2000VN000 2TB 64MB Cache SATA 6.0Gb/s Internal Hard Drive
These are in a RAID configuration.
Drive 2 is not part of the RAID.
Does anyone have any suggestion of how to monitor my RAID status?