I have NUC 55ppyh. I cannot access the bios.
The bios is set to legacy mode, but no F2 is seen on the screen at boot , you cannot go into windows and say let me access the bios on next reboot because windows is installed in none uefi mode.
The bios reset by removing the jumper and placing the bio file on usb key. This does not load, the key does not even flash( tried format in fat32 and ntfs and tried usb 2 and usb 3 keys), you can hear the fan run for 2 seconds and stops and keeps doing that but never loads a file.
If you put the jumper on 1 &2 nothing happens does not show any screen or boot.
Place jumper on 2 & 3 and the machine boots up into windows in legacy bios mode and runs fine but cannont get to bios.
I have tried to use widows bios update and its say it works , but must not default the bios to defaults so still cannot get in.
Tried boot windows 10 recovery key and that does not see uefi so cannot access it either.
The power button menu as never been seen either.....
I have been trying for 2 weeks now and i am about to put the unit in the bin HELP Please its doing me head in !